|
Specifications
Road safety, anti-impact wall-shaped barrier model “ET100” with
certificate of approval n. 101 dated 02/15/2007 in class H4b and
certificate n. 99 dated 02/15/2007 in class H2 according to law DM 2367
dated 06/21/2004 and to the regulation UNI EN 1317 for Side Border use;
tested for motorcyclist impact according to regulation UNE 135900,
prefabricated from vibrated, reinforced concrete of the following class:
Rck (Resistance to Compression) ≥45 Mpa, manufactured with cement type
42.5R and aggregates of quarry or river assessed and washed, with a "Reversed
T" profile; symmetrical with dimensions of 62x619x100 cm, reinforced
with caged B450/C steel, with bar cover not less than 20 mm. The higher
connection is held in place with a C45 steel rolled horizontal bar, 10
pitch and with a diameter of 28 mm, with double-layer painted ends with
a epoxy resin based finish and equipped with barrel fittings. The lower
connection is held in place with a kit composed by a double-layer
280x80x10 mm plate with tie-rods, M24 nuts, and washers, all hot-dip
galvanized. manufactured by a company which has the following
certification of quality: UNI EN ISO 9001:2008, certified by ICMQ and CE
Mark, certifying level 1. All elements are realized following the
project drawings and reinforcement. Provided with:
-
galvanized steel tie-plates for the connection of
the barrier elements;
-
barrel fittings for the threaded rolled bar;
-
laying accessories (bolts, washers, etc.);
-
possible level-compensating elements;
-
any other service or supply and their elements
needed to ensure the law classification.
Class H4b: APPROVED Side Border
Class H2: APPROVED Side Border
TESTED Motorcyclist impact
Cod. S001.B037
|
