|
Specifications
Road safety, anti-impact wall-shaped barrier model “ET100” with
certificate of approval n. 100 dated 02/15/2007 in class H4b for use as
single-lane traffic island; tested in class H4b for use as double-lane
traffic island, according to law DM 2367 dated 06/21/2004 and to the
regulation UNI EN 1317; tested for motorcyclist impact according to
regulation UNE 135900, prefabricated from vibrated, reinforced concrete
of the following class: Rck (Resistance to Compression) ≥45 Mpa,
manufactured with cement type 42.5R and aggregates of quarry or river
assessed and washed, with a "Reversed T" profile; symmetrical with
dimensions of 62x619x100 cm, reinforced with caged B450/C steel, with
bar cover not less than 20 mm. The higher connection is held in place
with a C45 steel rolled horizontal bar, 10 pitch and with a diameter of
28 mm, with double-layer painted ends with a epoxy resin based finish
and equipped with barrel fittings. The lower connection is held in place
with a kit composed by a double-layer 280x80x10 mm plate with tie-rods,
M24 nuts, and washers, all hot-dip galvanized. manufactured by a company
which has the following certification of quality: UNI EN ISO 9001:2008,
certified by ICMQ and CE Mark, certifying level 1. All elements are
realized following the project drawings and reinforcement. Provided with:
-
galvanized steel tie-plates for the connection of
the barrier elements;
-
barrel fittings for the threaded rolled bar;
-
laying accessories (bolts, washers, etc.);
-
possible level-compensating elements;
-
any other service or supply and their elements
needed to ensure the law classification.
Class H4b: APPROVED Single-lane traffic island
Class H4b: TESTED Double-lane traffic island
TESTED Motorcyclist impact
Cod. S001.B037
|
